VisiCan BMW F10 VentMount
Fits 2011–2016 BMW 5 Series and M5 (F10) and 2012–2018 6 Series and M6 (F12/F13).
Ships from California in 3–5 business days.
VisiCan replaces the louvers in one of your air vents with a color display that reads live data straight from your BMW's DME over the CAN-bus.
Fits
| Model | Engine | Years (US) |
|---|---|---|
| 528i | N52 (2011); N20 (2012–2016) | 2011–2016 |
| 535i, ActiveHybrid 5 | N55 | 2011–2016 |
| 535d | N57 diesel | 2014–2016 |
| 550i | N63 V8 | 2011–2016 |
| M5 | S63 V8 | 2013–2016 |
| 640i (F12 convertible, F13 coupe) | N55 | 2012–2018 |
| 650i (F12, F13) | N63 V8 | 2012–2018 |
| M6 (F12, F13) | S63 V8 | 2013–2018 |
Pick your engine at checkout. Firmware for the V8 engines is prepared to order, so allow a few extra days. F11 wagon, F07 5 Series GT and F06 Gran Coupe: message us first.
Does not fit: E60 (2004–2010) or G30 (2017+), which are separate models.
What it shows (N20/N55)
- Boost: actual and target
- Fuel: high-pressure and lift pump pressure, fuel level
- Oil pressure and temperature; coolant, intake air, exhaust gas and gearbox temperature
- Ignition timing and retard for each cylinder; misfire for each cylinder
- AFR, MAF, throttle, battery voltage, RPM and speed
The N57 diesel shows the BMW diesel list. N63 and S63 V8s show the equivalent values their DME provides; ask us for the exact list.
Values change color from white to orange to red as they approach the limits. A performance timer records acceleration runs from wheel speed data.
Install: about 30–45 minutes, no coding
- Unclip the vent with a plastic trim tool.
- Remove the louvers and slide the VisiCan housing in their place.
- Route the cable behind the dash to the OBD port and plug it in.
- Snap the vent back in. VisiCan powers on and off with the ignition.
Fully reversible. Nothing is cut or spliced.
In the box: VisiCan display in BMW F10 vent housing, OBD and power harness, USB-TTL programming module, USB extension cable for firmware updates.
FAQ
- Can I run MHD, bootmod3 or ISTA at the same time? Not at the same time on the OBD port. Switch VisiCan to OFF mode (one button) while you flash or scan, then switch it back.
- Why does my coolant reading move when the cluster stays steady? The factory gauge is buffered. VisiCan shows the real DME value, the same as ISTA.
- Does it work on a tuned car? Yes, stock or modified. It reads the factory sensors.
- Will it void my warranty? VisiCan only reads data and unplugs in minutes. Ask your dealer about your own warranty terms.
- Does it drain the battery? It switches on and off with the ignition.
- Returns: 30-day returns on unused hardware, shipped back to our California address. See our Return Policy.
Why buy from 4tuned
- In stock in California, ships in 3–5 business days, free US shipping
- No customs or import fees: we've already cleared them
- 30-day returns on unused hardware to a US address
- Install and firmware help by email and phone: info@4tuned.com, (530) 206-3815
- Secure checkout
VisiCan shows information only. Set it up while parked and keep your eyes on the road. You use it at your own risk; see our Terms.